Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK SHAMROCK

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK SHAMROCK Reviews

Other Picture

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK SHAMROCK Feature

• Blanks measure 3/4" x 3/4" x 5"
• Turns and drill easily
• Polish to super high gloss, no top coat needed

These acrylic blanks are undrilled, 3/4" x 3/4" square x 5" long. The blanks are high density with great working properties and polish to a super high gloss. Acrylic blanks take a beautiful polish that gives the appearance of a liquid tube. No top coat finish is necessary.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 31, 2011 13:51:03

Oneway Talon Chuck System

Oneway Talon Chuck System Reviews

Other Picture

Oneway Talon Chuck System Feature

• Power-grip, key-operated chuck
• Over-extension safety system
• Weighs 3.4 lbs
• Nickel-plated body and hardened base jaws
• Chuck has 3-1/2" body diameter and standard #2 jaws

This is an ideal chuck for mini and mid-size lathe owners who want a power-grip, key-operated chuck. Its perfect for lathes with a 16" swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. Chuck has 3-1/2" body diameter and standard #2 jaws. With nickel-plated body and hardened base jaws. Over-extension safety system prevents the base jaws from coming loose during operation. Base jaw slide design allows 50% more contact area, adding to longer life and easier chuck operation. Weighs 3.4 lbs. Requires a threaded insert - sold separately.

Visit Store Now !!

Detail Products

• 1'' X 8 Tpi Insert for Oneway Talon Chuck System

Detail Reviews

Mar 27, 2011 19:26:05

Cole Stops and Screws, Extra (8)

Cole Stops and Screws, Extra (8) Reviews

Other Picture

Cole Stops and Screws, Extra (8) Feature

• Fits Teknaltool cole jaw sets

Replacement stops and screws for Teknatool Cole Jaw Sets. Use in the Nova chuck while the Cole Jaws are still attached! About 1-3/4" long. RH thread.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 25, 2011 15:12:04

#1 Morse taper for Drill Chuck (Chuck Sold Separately)

#1 Morse taper for Drill Chuck (Chuck Sold Separately) Reviews

Other Picture

1/2" drill chuck for lathe is compatible with two choices of morse tapers. Use it with either the #1 Morse taper (Rockler #20785) or #2 Morse taper (Rockler #20793) to assemble as shown. Key is supplied with chuck. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils.

Visit Store Now !!

Detail Products

• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking LCAN8MD HSS Micro Detailing Anniversary Lathe Chisel Set, 8-Piece

Detail Reviews

Mar 21, 2011 23:51:03

Taig Steady Rest

Taig Steady Rest Reviews

Other Picture

Taig Steady Rest Feature

• Brand new
• Steady rest 3/32" to 1 1/2" capacity
• A2Z is an Authorized Taig Dealer

Steady rest 3/32" to 1 1/2" capacity

Visit Store Now !!

Detail Products

Detail Reviews

Mar 21, 2011 04:39:05

Cole Jaw Set

Cole Jaw Set Reviews

Other Picture

Cole Jaw Set Feature

• 3/8" thick cast aluminum
• Will expand into a 95-117mm (3-3/4"-4-5/8") dovetailed recess
• Will clamp the outside of a turned dovetailed foot 84-104mm (3-5/16"-4-1/8") in diameter
• 8 rubber stoppers

These versatile jaws of sturdy 3/8" thick cast aluminum with a 10" diameter have the same basic configuration as the smaller 25mm and 50mm units and can expand into a 95-117mm (3-3/4"-4-5/8") dovetailed recess, or clamp the outside of a turned dovetailed foot 84-104mm (3-5/16"-4-1/8") in diameter. Space the 8 rubber stoppers in any of 8 diameter positions on the face of the collet plates to finish the bottom of a bowl up to 10" in diameter. For larger bowls the stoppers may grip from the inside as the chuck expands outward. Any of your own custom made wooden plates may be applied.

Visit Store Now !!

Detail Products

• TEKNATOOL SUPERNOVA 2 CHUCK W/2" JAWS & WOODWORM SCREW (SUPERNOVA2)
• 1"-8 TPI Insert for Nova chucks
• 1-1/4"-8 TPI RH Insert
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• MSA Safety Works 817893 Adjustable Faceshield

Detail Reviews

Mar 20, 2011 06:44:06

Heavy Duty Ball Bearing Live Center

Heavy Duty Ball Bearing Live Center Reviews

Other Picture

Heavy Duty Ball Bearing Live Center Feature

• Heavy duty ball bearing construction
• 60 degree cone
• #2 Morse taper

This industrial strength, 1-1/2 lb live center features double 1-1/2" bearings for long life, even under the heaviest loads. Use the 60 degree cone for general work. Has a #2 Morse taper.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 19, 2011 01:29:05

Laguna Tools Lathe Copy Attachment

Laguna Tools Lathe Copy Attachment Reviews

Other Picture

Copy attachment for lathe.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 17, 2011 02:47:03

Steb Drive for Super Nova

Steb Drive for Super Nova Reviews

Other Picture

Steb Drive for Super Nova Feature

• With SuperNova2 gripping power you'll find yourself turning longer, more delicate stems
• It's quick to tighten and requires much less effort
• The ball nose allows the handle to operate at an angle while tightening the chuck
• Backing plate design incorporates a 24 division index for future indexing accessories
• Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual

The newest evolution of the classic Nova Chuck is finally available - the SuperNova2! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 15, 2011 20:41:04

Grizzly G8789 Carbide Inserts - Lg. 80° Diamond

Grizzly G8789 Carbide Inserts - Lg. 80° Diamond Reviews

Other Picture

For our G8787 7-Pc. Deluxe Tool Holder Set. For mild steel. Pack of 5.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 13, 2011 23:23:04

Ci1 Easy Rougher Replacement R4 Radius Cutter

Ci1 Easy Rougher Replacement R4 Radius Cutter Reviews

Other Picture

Ci1 Easy Rougher Replacement R4 Radius Cutter Feature

• Replacement blade for C1 Easy Rougher
• Radius Cutter

Ci1 Easy Rougher R4 Radius cutter

Visit Store Now !!

Detail Products

• Ci0 Easy Finisher Replacement Round Cutter
• Ci1 Easy Rougher w/Easy Grip Handle
• Ci1 Easy Rougher Replacement R2 Radius Cutter
• Ci1 Easy Rougher Replacement Square Cutter
• Ci0 Easy Finisher w/Easy Grip Handle

Detail Reviews

Mar 11, 2011 10:30:05

1"-8 TPI Insert for Nova chucks

1"-8 TPI Insert for Nova chucks Reviews

Other Picture

1"-8 TPI Insert for Nova chucks Feature

• Adapts any NOVA chuck to almost any lathe spindle at low cost.
• The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system

Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from the Compac). The insert has different lathe spindle thread sizes internally, and simply screws into the back of your Nova chucks. Once the insert is in place, you can then put your chuck onto your lathe.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 10, 2011 13:00:04

Royal Products 43360 1/8" to 2-1/4" Bar Capacity Heavy Duty Bar Puller With 3/4" Square Shank

Royal Products 43360 1/8" to 2-1/4" Bar Capacity Heavy Duty Bar Puller With 3/4" Square Shank Reviews

Other Picture

Royal Products 43360 1/8" to 2-1/4" Bar Capacity Heavy Duty Bar Puller With 3/4" Square Shank Feature

• Rugged, heavy-duty design withstands the toughest manufacturing environments
• Large internal die springs provide very strong gripping force
• All parts subject to wear are hardened for strength and durability
• 1 year warranty against failure due to manufacturing defects

Bar pullers provide a cost effective way to automate CNC lathes. Unit is very easy to use. Simply set gap between jaws 1⁄8" smaller than stock size. As the bar puller slides over the bar along the x-axis, the fingers flex to provide the gripping force. The turret then retracts along the z axis, pulling the bar out the desired position. Pre-load on internal die springs can be adjusted to fine tune the grip force. Includes one set of standard jaws and one blank spindle bushing. Extra capacity jaws sold separately.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 06, 2011 20:38:03